Comparative Analysis of The Performance of CCTV Camera Transmission Media Using UTP Cable and Optical Fiber
DOI:
https://doi.org/10.33795/jartel.v14i3.5290Keywords:
CCTV, EPON, Fiber Optic, UTP Cable, Quality of Service (QoS)Abstract
CCTV is an important part of maintaining security in the State Polytechnic of Malang, especially the Telecommunications Lab. In the installation of CCTV, the transmission media plays an important role. In this context, UTP cable and optical fiber are commonly used. The purpose of this research is to compare CCTV camera transmission using UTP cable and optical fiber using quantitative research methods with 3 kinds of tests. QoS parameter testing with TIPHON version standardization, network speed testing, and video quality testing using SSIM and PSNR parameters. Optical fiber delay testing gets an average value of 4.28976 ms and UTP cable of 4.44135 ms. The average jitter of optical fiber is 0.0017 ms and UTP cable is 0.2066 ms. In addition, the packet loss value shows that optical fiber has an average percentage of 8% while UTP cable is 11%. Speed testing shows that optical fiber has an upload speed of 987.52 Mbps and a download of 990.34 Mbps, UTP cable shows an upload of 978.98 Mbps and a download of 978.8 Mbps. While video quality testing shows UTP average PSNR value 30.480694 dB and SSIM 0.9158403 dB, and optical fiber with PSNR value 28.443975 dB, SSIM 0.8897703 dB.
References
Faruq, U., Ridho, A., Vrayulis, M., & Julio, E. (2021). Analisa Aliran Daya pada Sistem Tenaga Listrik menggunakan ETAP 12.6. Jurnal Sain, Energi, Teknologi & Industri), 6(1), 16–22. https://doi.org/10.31849/sainetin.v6i1.7031
Otniel, F., & Busaeri, N. (2019). Analisa Aliran Daya Sistem Tenaga Listrik Pada Bagian Penyulang 05ee0101a Di Area Utilities Ii Pt. Pertamina (Persero) Refinery Unit Iv cilacap Menggunakan Metode Newton-Raphson. In Journal Of Energy And Electrical Engineering (JEEE) (Vol. 1, Issue 01).
Fikri, M., Anggaini, D., Tinggi, S., Pln, T., & Id, M. A. (2018). Metode Newton Raphson Untuk Analisis Aliran Daya Jaringan Distribusi 12,66 kV.
Darmawan, I., Rafif, A., & Wiratama, A. W. (2019). Simulasi Aliran Daya Pada Pembangkit Listrik Tenaga Mesin Gas (Pltmg) Badas Untuk Sistem Kelistrikan Sumbawa Besar Menggunakan Software Etap 16. In Jurnal JINTEKS (Vol. 1, Issue 2)
Pangloli, K. M., Thaha, S., Gaffar, H. A., D4, P., Listrik, T., Elektro, J. T., & Ujung, N. (2020). Analisis Aliran Daya Menggunakan Metode Fast Decoupled Pada Sisi Tegangan 6.3 KV PT. Semen Tonasa V.
Indriyani, R. D., Harun, H., & Mohamad, Y. (n.d.). Analisis Aliran Daya Pada Sistem Tenaga Listrik Sulawesi Utara Dan Gorontalo Menggunakan Metode Fast Decoupled.
Aribowo, B. T., Setiawidayat, S., & Muksim, M. (2018). Prefix-RT Seminar Nasional Hasil Riset Simulasi Dan Analisis Load Flow Sistem Interkoneksi Kalimantan Timur Menggunakan Software Etap 12.6.
Syafi’i, A. M., Pradikatama, I., Nur, M. I., & Rizqullah, R. (2021). Analisis Aliran Daya Dan Hubung Singkat Modifikasi Sistem 30 Bus IEEE Menggunakan Metode Fast Decoupled. PoliGrid, 2(2), 56. https://doi.org/10.46964/poligrid.v2i2.731.
Gustian Nigara dan Yohanes Primadiyono, A. (n.d.). Analisis Aliran Daya Sistem Tenaga Listrik pada Bagian Texturizing di PT Asia Pasific Fibers Tbk Kendal menggunakan Software ETAP Power Station 4.0.
Wang, H., Li, Z., Tang, Q., Zhu, X., Meng, Z., & Du, B. (2023). Aromatic Compounds Affecting Electrical Treeing and Partial Discharge Properties of XLPE Insulation under Cyclic Thermal Loading for HVAC Cables. 2023 IEEE 4th International Conference on Electrical Materials and Power Equipment (ICEMPE), 1–4. https://doi.org/10.1109/ICEMPE57831.2023.10139630.
Zhao, Y., Dai, F., Li, Z., Song, C., Xi, Y., & Du, B. (2023). Effect of Crystalline Morphology on Electrical Tree Growth Characteristics of PP Insulation. 2023 IEEE 4th International Conference on Electrical Materials and Power Equipment (ICEMPE), 1–4. https://doi.org/10.1109/ICEMPE57831.2023.10139498.
Rahmat, S., Suwamo, S., & Aminuddin, S. (2017). Effects of thermal aging on the dielectric properties and dissolved gas analysis in ester from palm oil and Kraft composite paper insulation. 3rd IEEE Conference on Power Engineering and Renewable Energy, ICPERE 2016, 209–213. https://doi.org/10.1109/ICPERE.2016.7904873.
S. Rahmat, H. Purnata, A. A. Musyafiq, R. P. Dewi, N. A. Ilahi and E. Alimudin, "The Correlation Among Ozone Gases, Hissing Frequency, and Ultraviolet Light in Corona Effects," 2022 2nd International Conference on Electronic and Electrical Engineering and Intelligent System (ICE3IS), Yogyakarta, Indonesia, 2022, pp. 74-78, doi: 10.1109/ICE3IS56585.2022.10010024.
L. Yang, T. Hu, and C. Zhang, “Design and implementation of engraving machine controller,” in 2010 International Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2010, 2010, pp. 942–945. doi: 10.1109/ICMTMA.2010.748.
T. Shivakumar, M. S. Sravan, and K. Selvajyothi, “Python-based 3-Axis CNC plotter,” PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 823–827, 2017, doi: 10.1109/PECON.2016.7951672.
