DESAIN DAN PEMBUATAN PERANGKAT PEMBENTUK PENGGANTUNG PAKAIAN BENTUK S BERSUDUT 90o
DOI:
https://doi.org/10.33795/abdimas.v12i2.9112Keywords:
strip plate forming device, 90o angle S-shaped clothes hanger, press tool with hydraulic jack, portable strip plate bending deviceAbstract
The problem lies in the inconsistency of the dimensions of the 90° S-shaped clothes hanger forming device for use in research requiring bending and deflection forces using the Tarno Grocki compression testing machine. This community service project aims to develop a 90° S-shaped clothes hanger forming device whose design can be used in research requiring bending and deflection forces using the Tarno Grocki compression testing machine and cannot be used as a stand-alone device without the aid of a hydraulic jack and frame as a production tool in a home industry. The method applied is modifying the design and device so that it can function using the Tarno Grocki compression testing machine and a stand-alone device with the aid of a hydraulic jack as a production tool in a home industry, including the construction of a support table, a trial run, and the donation to partners or home industries. The results of the community service in modifying the 90o S-Shaped Clothes Hanger Forming Device can be used as a production tool by the household industry, so that there is a synergy between State Polytechnic of Malang and the community in producing clothes hangers for the community's needs more efficiently and can meet the needs of the community in general.
References
Abidin, Z., Pratama, G.D., Slamet, A., Putri, F.T., Alfauzi, A.S., dan Nugroho, W.I., 2022, Press Tool Jenis Simple Tool untuk Produksi Shim guna Meningkatkan Kualitas Produksi Welcab, Jurnal Rekayasa Mesin, 17(3), 503-518.
Faisal, M., Herisiswanto, dan Akbar, M., 2019, Perancangan Press Tool dengan Memanfaatkan Mesin Press Bending di Laboratorium Teknologi Produksi Universitas Riau, Jurnal Online Mahasiswa (JOM) Bidang Teknik dan Sains, 6(1), 1-6.
Maiman, R., Syael, R.P., Mulyadi, M., Budiman, D., dan Yetri, Y., 2022, Rancangan Press Tool Pembuat Komponen Penumpu Dongkrak Pantograf, Manutech: Jurnal Teknologi Manufaktur, 14(02), 1-9.
Qodar, A.M.L., Wicaksana, A.N.I, Fernanda, M.I., Saputra, R.A., Rosidi, dan Wijatmaka, T., 2019, Rancang Bangun Perkakas Tekan untuk Membuat Koin, Seminar Nasional Teknik Mesin Politeknik Negeri Cilacap, 66-72.
Lestari, N., Kurniawan, S.D., dan Yudhanto, B., 2018, Tube Bending Machine for Home Industry Scale, In Conference Senatik STT Adisutjipto Yogyakarta, 4, 4-7.
Suyuti, M.A., 2019, Rancang Bangun Simpel Press Tool untuk Bending V Bottoming, Jurnal Teknik Mesin Sinergi, 13(2), 160-173.
Purwantono, P., Erizon, N., Helmi, N., Akhbar, M., dan Muhibuddin, M., 2020, Effect of Spring Back on Formation Process of Sheet Metal Bending Plates, Teknomekanik, 3(1), 28-35.
Dahlan, M., Jamaludin, R., dan Amaludin, M.N.H., 2023, Analisis Pengaruh Variasi Sudut dan Radius Punch pada Proses Bending Pelat Stainless Steel, MUSTEK ANIM HA, 12(01), 15-20.
Amrullah, R.N., Hadi, S., Rizza, M.A., Yudiyanto, E., Sharif, S., dan Suhaimi, M.A., 2024, Evaluation of the Environmental Impact of Material Selection and Design in the Hanger Press Machine Manufacturing Process, Jurnal Polimesin, 22, 521-525.
Hadi, S., Hardjito, A., Wicaksono, H., Firmansyah, H.I., Amrullah, R.N., Permana, R.W., Takwim, R.N.A., Dana, B.C.M., Mustafa, M.S. and Kusmoko, A., 2025, Minimalizing Spring Back of Metal Plates Bending Effect by Squishing with Press Tool, Engieering Solid Mechanic, 13(4), 373-380
Hadi, S., 2016. Teknologi Bahan, ISBN 978-979-29-5586-6, https://andipublisher.com/produk/detail/teknologi-bahan Andi Offset, Yogyakarta.
Anonim, 2025a, Besi As S45C Ø 40 mm x 6 m, https://www.smsperkasa.com/besi-as-s45c-o-40mm-x-6m/sku/BE1005154, diakses 29 Januari 2025.
Anonim, 2025b, Baja Ringan Kanal C, https://homei.co.id/web/home/bahan-material/view?id=barang-baja-ringan-kanal-cc-trusscanal-c-075, diakses 24 Agustus 2025.
Hadi, S., 2018. Teknologi Bahan Lanjut, ISBN 978-979-29-6366-3, https://andipublisher.com/produk/detail/teknologi-bahan-lanjut Andi Offset, Yogyakarta.
Anonim, 2024, Kawat Las Listrik ukuran 2 mm Nikko Steel, https://www.google.co.id/search?q=pakan+las+listrik&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiFr6Wj3erZAhUIxLwKHcS5A1QQ_AUICigB&biw=1366&bih=613#imgrc=9dgr7aoxgNX10M:, diakses 24 Agustus 2024.
Anonim, 2024, Dongkrak Botol/Bottle Hydraulic 3 Ton, Hydraulic Jack Truck-Mobil, https://www.tokopedia.com/alfredowei/dongkrak-botol-bottle-3-ton-3ton-hidrolik-hydraulic-jack-truck-mobil?extParam=ivf%3Dfalse&src=topads, diakses 24 Agustus 2024.
Hadi, S., 2024. Pengujian Bahan Teknik, ISBN 978-623-01-3945-1, https://andipublisher.com/produk/detail/pengujian-bahan-teknik, Andi Offset, Yogyakarta.
Jutz, H., dan Scharkus, E., 2006, Westerman Tables for the Metal Trade (2nd Edition), https://books.google.co.id/books/about/Westermann_Tables_For_The_Metal_Trade.html?id=tnxtzYuO2qIC&redir_esc=y, New Age Internasional, New Delhi.
Wiryosumarto, Harsono, 2000, Teknologi Pengelasan Logam, Pradnya Paramita, Jakarta, https://www.academia.edu/21041117/welding_teknologi
S. Hadi, A. Hardjito, H. Wicaksono, H.I. Firmansyah, R.N. Amrullah, R.W. Permana, R.N.A. Takwim, B.C.M. Dana, M.S. Mustafa and A. Kusmoko, “Minimalizing spring back of metal plates bending effect by squishing with press tool,” Engineering Solid Mechanics, vol. 13, pp. 373-380, 2025, doi:10.5267/j.esm.2025.8.001
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Jurnal Pengabdian kepada Masyarakat
This work is licensed under a Creative Commons Attribution 4.0 International License.
