Main Article Content
Abstract
In this era of very rapid development, construction construction occurs in various places. This also triggers the demand for building materials to increase, not least in terms of concrete construction. Concrete is the main material that is often used in many construction fields such as houses, factories, buildings, bridges, and so on.. The materials used as a mixture are made of materials that are easy to obtain, easy to process, have high durability, and are also durable so they are in great demand in construction.. The Data needed in this study are the results of coarse aggregate testing, fine aggregate testing results, concrete compressive strength testing results, and price requirement analysis results. Analysis of fine and coarse aggregate refers to SNI 03-6820-2002, SNI 1969-2008, ASTM C-556-67, ASTM C-33-74. Mix design analysis refers to SNI-03-2843-2000. Unit price analysis refers to the basic unit price of Malang activities. The results of the analysis show that when checking fine aggregate and coarse aggregate, both aggregates must meet quality requirements. The results showed that, the cost required in the test increases with each variation, inversely proportional to the quality of concrete produced, namely the quality of concrete is not good
Keywords
Article Details
References
- Akbar, F., Ariyanto, A., Eng, M., Bambang Edison,), & Pd, S. (2014). Penggunaan Tempurung Kelapa Terhadap Kuat Tekan Beton K-100.
- Asrullah. (2019). Analisa Kuat Tekan Beton Dengan Menggunakan Sika Concrete Refair Mortar Dan Tempurung Kelapa Pada Campuran Beton K 300. 9(1).
- Badan Standardisasi Nasional Indonesia. (2008). SNI 1970-2008, Cara Uji Berat Jenis dan Penyerapan Air Agregat Halus. Badan Standar Nasional Indonesia, 7–18.http://sni.litbang.pu.go.id/index.php?r=/sni/new/sni/detail/id/195
- Elnov, D., Debrinda Rama, A., & Fernando, R. (2018). Pengaruh Pecahan Tempurung Kelapa Sebagai Pengganti Agregat Kasar Dalam Campuran Beton Effect of Coconut Shell Fragments As Substitute for Coarse Aggregate in Concrete Mixture. 07(4), 157–166.
- Indra, Muhammad & Zulkarnain, F. (2020). Pengujian Kuat Tekan Beton Dengan Menggunakan Abu Cangkang Kelapa Sawit Dengan Bahan Tambah Bondcrete.
- Mukhlis Iwan Mustaqim, Juli Marliansyah, A. R. (2017). Pengaruh Penambahan Abu Tempurung Kelapa Terhadap Kuat Tekan Paving Block. Jurnal Mahasiswa Teknik, 3, 1–9.
- Nawati. (2016). Pengaruh Tempurung Kelapa Sebagai Bahan Tambah Terhadap Agregat Kasar dalam Campuran Beton Normal.
- Pau. (2016). Kompresif Karakteristik Beton dengan Sekam Padi dan Tempurung Kelapa Sebagai Pengganti Agregat Halus dan Agregat Kasar.
- Pratama, E., & Hisyam, E. S. (2016). Kajian Kuat Tekan Dan Kuat Tarik Belah Beton Kertas (Papercrete) Dengan Bahan Tambah Serat Nylon. Forum Profesional Teknik Sipil, 4(1), 28–38.
- Riyanto, D., Cahyadi, H., & Respati, R. (2018). Pengaruh Pemakaian Arang Batok Kelapa terhadap Kuat Tekan Beton K225. Media Ilmiah Teknik Sipil, 6(2), 94–101. https://doi.org/10.33084/mits.v6i2.252
- SNI 03-2834-2000, tata cara pembuatan rencana campuran beton normal. (2000b). Tata Cara Pembuatan Rencana Campuran Beton Normal. SNI 03- 2834-2000. 1–34.
- SNI 03-2834-2000. (2000a). SNI 03-2834-2000: Tata cara pembuatan rencana campuran beton normal. Sni 03-2834-2000, 1–34.
- SNI 1974-2011. (2011). Cara Uji Kuat Tekan Beton dengan Benda Uji Silinder. Badan Standardisasi Nasional Indonesia, 20.
- Standard, A. S. T. M. (2003). C33,“Standard Specification for Concrete Aggregates,” ASTM International, vol. i, no.
References
Akbar, F., Ariyanto, A., Eng, M., Bambang Edison,), & Pd, S. (2014). Penggunaan Tempurung Kelapa Terhadap Kuat Tekan Beton K-100.
Asrullah. (2019). Analisa Kuat Tekan Beton Dengan Menggunakan Sika Concrete Refair Mortar Dan Tempurung Kelapa Pada Campuran Beton K 300. 9(1).
Badan Standardisasi Nasional Indonesia. (2008). SNI 1970-2008, Cara Uji Berat Jenis dan Penyerapan Air Agregat Halus. Badan Standar Nasional Indonesia, 7–18.http://sni.litbang.pu.go.id/index.php?r=/sni/new/sni/detail/id/195
Elnov, D., Debrinda Rama, A., & Fernando, R. (2018). Pengaruh Pecahan Tempurung Kelapa Sebagai Pengganti Agregat Kasar Dalam Campuran Beton Effect of Coconut Shell Fragments As Substitute for Coarse Aggregate in Concrete Mixture. 07(4), 157–166.
Indra, Muhammad & Zulkarnain, F. (2020). Pengujian Kuat Tekan Beton Dengan Menggunakan Abu Cangkang Kelapa Sawit Dengan Bahan Tambah Bondcrete.
Mukhlis Iwan Mustaqim, Juli Marliansyah, A. R. (2017). Pengaruh Penambahan Abu Tempurung Kelapa Terhadap Kuat Tekan Paving Block. Jurnal Mahasiswa Teknik, 3, 1–9.
Nawati. (2016). Pengaruh Tempurung Kelapa Sebagai Bahan Tambah Terhadap Agregat Kasar dalam Campuran Beton Normal.
Pau. (2016). Kompresif Karakteristik Beton dengan Sekam Padi dan Tempurung Kelapa Sebagai Pengganti Agregat Halus dan Agregat Kasar.
Pratama, E., & Hisyam, E. S. (2016). Kajian Kuat Tekan Dan Kuat Tarik Belah Beton Kertas (Papercrete) Dengan Bahan Tambah Serat Nylon. Forum Profesional Teknik Sipil, 4(1), 28–38.
Riyanto, D., Cahyadi, H., & Respati, R. (2018). Pengaruh Pemakaian Arang Batok Kelapa terhadap Kuat Tekan Beton K225. Media Ilmiah Teknik Sipil, 6(2), 94–101. https://doi.org/10.33084/mits.v6i2.252
SNI 03-2834-2000, tata cara pembuatan rencana campuran beton normal. (2000b). Tata Cara Pembuatan Rencana Campuran Beton Normal. SNI 03- 2834-2000. 1–34.
SNI 03-2834-2000. (2000a). SNI 03-2834-2000: Tata cara pembuatan rencana campuran beton normal. Sni 03-2834-2000, 1–34.
SNI 1974-2011. (2011). Cara Uji Kuat Tekan Beton dengan Benda Uji Silinder. Badan Standardisasi Nasional Indonesia, 20.
Standard, A. S. T. M. (2003). C33,“Standard Specification for Concrete Aggregates,” ASTM International, vol. i, no.