PERENCANAAN STRUKTUR GEDUNG KANJURUHAN CREATIVE CENTER BERBASIS BUILDING INFORMATION MODELLING (BIM) DI KABUPATEN MALANG
DOI:
https://doi.org/10.33795/pjts.v18i2.8930Keywords:
Creative Center, Upper Structure, Lower Structure, Building Information Modeling (BIM), 5D Estimating, 4D Simulation, Autodesk Revit, Autodesk Robot Structural Analysis Proffesional, Autodesk Navisworks ManageAbstract
The use of Building Information Modeling (BIM) is a solution to plan the structure of the technology based Kanjuruhan Creative Center Building that is systematic, effective, and integrated with the building's function as a central creative space facility in Malang Regency. This thesis aims to plan the structural load on the building, upper structural elements, lower structural elements, Budget Plan (RAB), and simulation of construction work progress. The data used includes sondir data and load data contained in SNI 1726-2019 on Earthquake Resistance Planning, SNI 1727-2020 on Minimum Design Loads, SNI 2847-2019 on Structural Concrete Requirements, SNI 8900-2020 on Simple Design for Reinforced Concrete. The results of the planning obtained include dead load, live load, wind load, rainwater load, earthquake load, and 31 types of load combinations. Reinforcement details of the upper structural elements include floor slab elements, roof slabs, stair plates, 2 types of main beams, 2 types of child beams, interior columns, and exterior columns. Reinforcement details of the lower structural elements include 2 types of tie beams, 4 types of pile caps, 2 types of bore piles, and soil bearing capacity. The cost budget plan (RAB) for structural work based on 5D Estimating is Rp 30,467,891,102.00. Simulation video of the 3D building construction work process based on 4D Simulation which contains information about the progress of building work consisting of day, date, time, day to, week to, and the amount of cost required at a certain period in the project.
References
Agus, & Gushendra R. (2015). Perbandingan Analisa Struktur Model Portal Open Frame, Bresing dan Dinding Geser Pada Struktur Gedung Beton Bertulang Terhadap Beban Gempa. Journal Momentum - ITP Padang, 17. 2015.
Badan Pusat Statistik Kabupaten Malang. (2024). Jumlah Pertumbuhan Penduduk Tahun 2023. Malang.
Badan Pusat Statistik Kabupaten Malang. (2024). Luas Wilayah Kabupaten Malang. Malang.
Badan Standardisasi Nasional. (2019). SNI 1726:2019 Beban Desain Minimum dan Kriteria Terkait untuk Bangunan Gedung dan Struktur Lain. Jakarta..
Badan Standardisasi Nasional. (2019). SNI 2847:2019 Persyaratan Beton Struktural untuk Bangunan Gedung. Jakarta.
Badan Standardisasi Nasional. SNI 1727:2020 Tata Cara Perencanaan Ketahanan Gempa untuk Struktur Gedung dan Nongedung. Jakarta.
Badan Standardisasi Nasional. (2020). SNI 8900:2020 Panduan Desain Sederhana untuk Bangunan Beton Bertulang. Jakarta.
Bowles, Joseph, E. (1993). Analisis dan Disain Pondasi. Edisi Kedua. Jakarta: Erlangga.
Chen & Luo. (2014). A BIM-Based Construction Quality Management Model and Its Applications. School of Civil Engineering & Mechanics, Huazhong University of Science & Technology.
Dipohusodo, I. (1996). Manajemen Proyek dan Konstruksi Jilid II. Kanisius.
Eastman, C. M. (2011). BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers, and Contractors. Wiley.
Hardiyatmo & Christady, H. (2011). Analisis dan Perancangan Fondasi II Edisi Kedua. Gadjah Mada
University Press. Yogyakarta.
Hasan A., & Astira, I. F. (2013). Analisis Perbandingan Simpangan Lateral Bangunan Tinggi dengan Variasi Bentuk dan Posisi Dinding Geser Studi Kasus: Proyek Apartemen The Royale Springhill Residence. Jurnal Teknik Sipil Dan Lingkungan, 1.
Kementerian Pariwisata dan Ekonomi Kreatif. (2019). Potensi Industri Kreatif Indonesia 2019. Jakarta.
Martin, P., & Uk, A. (2010). Making Space for Creativity.
Nawary, O., Nawary, & Kuenstle, M. (2015). Building Information Modeling: Framework for Structural Design. Perancis. CRC Press. 2015.
O’Hara, E., & Naik, D. (2021). Mapping Creative Hubs in England.
Oktavia, A. C., & Rasidi, N. (2022). Perencanaan Struktur Gedung Asrama Putra Anwarut-Taufiq Kota Batu. Jurnal Online Skripsi Manajemen Rekayasa Konstruksi (JOS-MRK), 3(2), 1–7. 2022.
Prasetyo, I. A. N., & Rochman, T. (2021). Perencanaan dan Pemodelan 3d Struktur Gedung Co-Working Space 4 Lantai Soekarno Hatta Kota Malang Berbasis Building Information Modeling (BIM). Jurnal Online Skripsi Manajemen Rekayasa Konstruksi (JOS-MRK), 2(1), 78–84. 2021.
Setiawan, A. (2016). Perencanaan Struktur Beton Bertulang berdasarkan SNI 2847: 2013. Jakarta: Erlangga,
Thoring, K., Desmet, P., & Badke-Schaub, P. Creative space: A systematic review of the literature. Proceedings of the International Conference on Engineering Design, ICED, 299–308,
Virani, T. E. & Malem, W. (2015). Re-Articulating the Creative Hub Concept as a Model for Business Support in the Local Creative Economy: the Case of Mare Street in Hackney.
Wardhono, A. (2010). Studi Perilaku Struktur Beton Bertulang Terhadap Kinerja Batas Akibat Pengaruh Tinggi Bangunan Dan Dimensi Kolom Berdasarkan SNI 03-1726-2002. Jurnal Teknik WAKTU, 08.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Prokons: Jurnal Teknik Sipil
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
